Back in Mazatlan and back on Juniper

After three months away from Mazatlan and Juniper, we returned to find the boat in pretty good shape here at Marina Mazatlan. No mildew, thanks to a small dehumidifier we set up prior to leaving (to which Scott attached a hose to auto-drain into the sink). We discovered some minor issues that we’ll need to take care of such as:

  • Our battery monitor died and needs replacing.
  • The varnish has begun to peel at the joints on both toe rails so we’ll need to have that area sanded down and revarnished (covered under warranty).
  • The head needs to be rebuilt. We did this a couple of years ago and it’s about as unpleasant as you might expect.
  • Replacing a slide on our mainsail.  We won’t be able to raise the sail otherwise.
  • Go up the mast and replace our spreader lights. One went out last year during Hurricane Newton and rather than fix it we’re replacing both of them with LED lights.

Once that’s all sorted we’ll be heading south to some of the places we’ve already been (Matanchen, Chacala, Banderas Bay) and to some we haven’t (Barra de Navidad, Tenacatita).

But first we’re going to test out the major work that we had done by motoring over to Stone Island here in Mazatlan. If everything works well, we’ll anchor out and head south. If not, we’ll head back into the marina for more work.

We’re both a little hesitant about our first passage and want to test out the engine to make sure that it’s working properly. Last thing we want is another issue in the middle of nowhere. We’re chomping at the bit to get out of Mazatlan and we’re really excited to begin cruising again!